Contact Us
Excavator bucket teeth are important consumable parts on excavators. Similar to human teeth, they are combined bucket teeth composed of tooth seats and tooth tips, and the two are connected by pins. Due to the wear and tear of the bucket teeth, the failed part is the tip of the tooth, as long as the tip is replaced.
Classified according to the environment in which excavator bucket teeth are used. Excavator bucket teeth can be divided into rock teeth (for iron ore, quarry, etc.), earth square teeth (for digging soil, sand, etc.), conical teeth (for coal mines). Divided according to the bucket tooth seat: excavator bucket teeth can be divided into vertical pin bucket teeth (mainly Hitachi excavators), horizontal pin bucket teeth (Komatsu excavators, Carter excavators, Daewoo excavators, Kobelco excavators, etc.) , Rotary digging bucket teeth (V series bucket teeth).
1. use good-quality wearable high strength steel plate, the anti-rally welding wire and the welding machine as the processing equipment to weld the product carefully by our expert.
2. All kinds of buckets and bucket teeth and bucket side cutters , for any excavator are available, such as:
DOOSAN
KATO
SUMITOMO
BRAND | ALOGUE | ||||||||
BULLDOZER | D20 | D30 | D31 | D37 | D40 | D41 | D45 | D50 | D60 |
D65 | D68 | D75 | D80 | D85 | D150 | D155 | D275 | D355 | |
D3C | D3D | D4C | D4D | D4H | D5 | D6C | D6D | D6H | |
D7G | D8K | D8N | D9N | D10N | D11N | ||||
KOMATSU | PC30 | PC40 | PC45 | PC60 | PC75 | PC100 | PC120 | PC150 | PC200 |
PC220 | PC300 | PC350 | PC400 | ||||||
E70B | E110 | E120B | E215 | E235 | E307 | E311 | E312 | E322 | |
E180 | E240 | E200B | E320 | E300 | E300B | E330 | E325 | ||
HITACHI | EX30 | EX40 | EX60 | EX100 | EX120 | EX200 | EX220 | EX270 | EX300 |
EX400 | EX600 | UH043 | UH052 | UH53 | UH07 | UH081 | UH082 | UH083 | |
FIAT-HITACHI | FH120 | FH130 | FH150 | FH200 | FH220 | FH270 | FH300 | ||
EC55 | EC130 | EC150 | EC200 | EC210 | EC240 | EC290 | EC360 | ||
DAEWOO | DH55 | DH130 | DH180 | DH200 | DH280 | DH300 | DH320 | ||
HYUNDAI | R60 | R130 | R200 | R210 | R220 | R290 | R320 | R914 | |
KATO | HD250 | HD400 | HD450 | HD700 | HD770 | HD820 | HD1250 | ||
KOBELCO | SK40 | SK60 | SK100 | SK120 | SK200 | SK220 | SK04-2 | SK07 | |
SK07N2 | SK09 | SK12 | SK14 | SK300 | SK310 | SK400 | |||
JCB | JS70 | JS75 | JS110 | JS130 | JS160 | JS180 | JS200 | JS220 | |
JS240 | JS260 | JS300 | JS330 | ||||||
SUMITOMO | SH70 | SH100 | SH120 | SH160 | SH200 | SH260 | SH265 | SH280 | SH300 |
SH340 | LS2650 | LS2800 | LS3400 | LS4300 | |||||
MX8 | SE200 | SE210 | SE280 | MX292 | SE350 | ||||
MITSUBISHI | MS110 | MS120 | MS140 | MS180 |
All manufacturer's names,symbols&descriptions are used for reference purpose only,and it is not implied that and any part listed is the product of these manufacturers.
1. Are you a trader or manufacturer?
We are an integrated industry and trade enterprise
2. How can I be sure the part will fit my excavator?
Give us the correct model/machine serial number/any number on the part itself. Or measure the parts and give us dimensions or drawings.
3. What about the payment terms?
We usually accept T/T or trade assurance. Other terms may also be negotiated.
4. What is your minimum order?
It depends on what you buy. Normally, our minimum order is a full 20ft container, LCL containers (less than one container load) are acceptable.
5. What is your delivery time?
FOB Shanghai or any Chinese port: 20 days. If any parts in stock, our delivery time is only 0-7 days.
6. How about the quality control?
We have a complete quality control system to produce perfect products. A team will carefully inspect product quality and specifiion pieces, monitor each production process until packaging is complete, to ensure the product goes safely into the container.
Send your inquiry directly to us